Presets

Use presets to divide the keyboard into zones or layer MIDI parts. Each preset contains three zones, with its own key range and routing for each zone.

Control or display	Meaning
P1–P4	Selects the active preset. The zone controls below edit the selected preset.
Keyboard	Shows the zone ranges as coloured bands. Overlapping ranges can be used to play more than one part from the same keys.
Zone 1–3	Selects the zone to edit. Its row summarises the range, key count, MIDI channel, octave shift and enabled controllers.
Enabled	Turns the selected zone on or off.
Start / End	Sets the lowest and highest key in the zone using MIDI note numbers. These are not the numbers stamped on the wooden keys.
Learn	Lets you set the zone range by playing its lowest key and then its highest key, following the prompts. Release the first key before playing the second.
Stop learning	Cancels the current range-learning operation.
Ch	Sets the zone's MIDI output channel, from 1 to 16. Match it to the part or sound you want to play.
Oct	Transposes the zone's output by up to two octaves down or up. The physical key range stays the same.
Sustain	Routes sustain-controller messages to this zone's channel. The sustain input must also be enabled in CC Routing.
Expr.	Routes expression-controller messages to this zone. Enable the expression input in CC Routing first.
Poti	Routes potentiometer-controller messages to this zone. Enable the potentiometer input in CC Routing first.
Ch.AFT	Enables channel aftertouch for the zone. The receiving instrument applies this pressure message to the MIDI channel.
Poly.AFT	Enables polyphonic aftertouch, with pressure messages associated with individual notes. The receiving instrument must support polyphonic aftertouch to use them.
Reset	Restores the selected zone's default settings. It affects that zone, rather than all four presets.

The Controllers column lists the routing enabled for each zone. A greyed-out controller option means its input must first be enabled in CC Routing.